On Call Electrical
Call Us Now! (610) 510-2333

Home Energy Audit in Allentown for Homes Old and New

Home Energy Audit in Allentown checks the panel, the grounding, and every circuit against what the house actually carries today.

Call Us Now or Request a Free Quote

(610) 510-2333

Home Energy Audit in Allentown Built Around How the House Was Wired

A Home Energy Audit in Allentown starts with the panel, because a lot of the houses here went up in the years right after the second World War, when a house was wired for a stove, a fridge, and maybe a window unit, not much else. An electrical contractor in Allentown can walk that panel and tell within minutes whether it was ever meant to carry what is plugged into it now. Homeowners who pair the audit with professional electrical panel upgrade work get a wiring plan and a fix in the same visit.

In houses with a basement panel and a single meter, the audit usually opens with a walk of every circuit from the box outward, checking what still runs on fuses and what has already been converted to breakers. Postponing it means living with a panel that trips under normal use or, worse, one that never trips at all when it should. Pairing the visit with reliable electrical wiring work catches the runs that were patched rather than replaced.

Electrician in Allentown, PA uses a clamp meter to measure circuit current during a home energy auditElectrician in Allentown, PA uses thermal camera to measure heat loss and electrical loads during home energy audit

What type of electrical project is this?
  • TCPA Compliance
  • Comodo SSL Certificate
  • True Trust

What Local Contractors Check Alongside a Home Energy Audit in Allentown

A Home Energy Audit in Allentown rarely stands alone. These four services come up most often once the panel and circuits have been walked and a plan is on the table.

Panel Upgrade Following the Audit

When a Home Energy Audit in Allentown turns up a panel still running on fuses or with no room for another breaker, replacing it is the next practical step for the house.

Get a Panel Quote

Whole Home Surge Protection Add-On

Once circuits are mapped and the panel is confirmed sound, adding quality whole home surge protection protects everything downstream of it, from the furnace board to whatever gets plugged in next.

Add Surge Protection

Outlet and Switch Repair

A lot of houses in the audit turn up outlets that are warm to the touch or switches that stick, small signs that point to a bigger issue behind the wall worth fixing before it spreads.

Request Outlet Repair

Outdoor and Detached Circuit Check

Detached garages, sheds, and yard lighting age differently than the house itself, and an audit that includes expert landscape lighting circuits catches runs that were never protected the way the interior wiring was.

Check Outdoor Circuits

On Call Electrical
Request a Free QuoteCall now(610) 510-2333

How the Season Changes What a Home Energy Audit in Allentown Finds

The same house carries a different load depending on the time of year, and a Home Energy Audit in Allentown reads differently in each one.

Home Energy Audit in Allentown, PA Before Spring Work Begins

Spring is the window to act on what an audit finds before demand climbs again: a panel swap, an added circuit for a new appliance, or outdoor and pool circuits brought back into service after sitting idle.

Schedule Spring Home Energy Audit

Home Energy Audit in Allentown, PA When Cooling Runs All Summer

A panel sized for a house without central air gets tested hard once cooling runs for months straight, and summer is when an undersized service stops hiding. Pairing the audit with specialists thermostat installation helps the system run without adding more draw than the panel can take.

Schedule Summer Home Energy Audit

Home Energy Audit in Allentown, PA During the Fall Handoff

Fall is the handoff between cooling and heating, and the right moment to fix what summer exposed before the next season stacks a new load onto the same circuits.

Schedule Fall Home Energy Audit

Home Energy Audit in Allentown, PA Before Winter Load Stacks Up

Winter piles heating, holiday lighting, and space heaters onto circuits that were never built to carry all of it together, and the house is what has to absorb that stack.

Schedule Winter Home Energy Audit

Technician reviews home energy audit recommendations beside an electrical panel in Allentown, PA

Allentown Homeowners Trust Electrical Contractors Found Through Us

Electrical Contractors Serving Homeowners Across Allentown, PA

On Call Electrical connects homeowners with local electrical contractors across the Greater Allentown area, from established neighborhoods in Whitehall to newer neighborhoods around Center Valley. Wherever the home is located, professionals serving the area are ready to help, regardless of which part of town it sits in.

Homes throughout Allentown get the same attention, including outlying properties on larger lots around Bath. Local electrical professionals cover the region so every homeowner gets help, wherever the home is located.

Electrical Contractor Service Areas and Zip Codes Near Allentown

Browse the neighborhoods where our electrical contractor and electrician in Allentown team responds to homes across the region

  • Allentown, PA (18101)
  • West End, PA (18104)
  • East Side, PA (18109)
  • South Side, PA (18103)
  • Catasauqua, PA (18032)
  • Whitehall, PA (18052)
  • Coplay, PA (18037)
  • Northampton, PA (18067)
  • Fountain Hill, PA (18015)
  • Bath, PA (18014)
  • Laurys Station, PA (18059)
  • Hellertown, PA (18055)
  • Center Valley, PA (18034)
  • Emmaus, PA (18049)
  • Cherryville, PA (18035)
  • Orefield, PA (18069)
  • Schnecksville, PA (18078)
  • Nazareth, PA (18064)
  • Coopersburg, PA (18036)
  • Trexlertown, PA (18087)
  • Danielsville, PA (18038)
  • Springtown, PA (18081)
  • Macungie, PA (18062)
  • Bethlehem, PA (18018)
  • Wescosville, PA (18106)
  • Alburtis, PA (18011)
  • Slatington, PA (18080)
  • Walnutport, PA (18088)

Connect with a dependable professional near you and have the work handled well.

  • Free quotes
  • Vetted professionals
  • Quick replies

Allentown Electrical Contractor Questions Homeowners Ask Before Calling

An electrical contractor guide for Allentown's mix of older rowhomes and later additions, covering urgent problems, what the work involves, capacity for modern loads, cost, and how to find someone local.

  • Shut off power at the panel if it is safe to reach, then avoid touching the outlet or fixture until someone looks at it. A warm cover plate or a burning smell in a Allentown home is not something to sit on overnight. Local contractors offer around-the-clock emergency response for exactly this kind of call.

  • It usually starts with a load assessment, since a Allentown home with a basement allows new circuits to run through joists rather than tearing into finished walls. After diagnosis, the contractor gives a written estimate, pulls the necessary permit, and schedules the work with an inspection at the end. Basement access shortens the timeline compared to slab construction, but older framing can still add a day.

  • A breaker that trips only under load is inconvenient, but a hot outlet, flickering lights tied to one circuit, or a burning smell points to heat building at a connection. Aluminum branch wiring shows up in Allentown homes from that mid-century wave, and it needs a look before it becomes a fire risk rather than a nuisance.

  • On Call Electrical collects details about the job and matches Allentown homeowners with local contractors who handle that type of work. Comparing quotes side by side shows whether one bid covers a full panel assessment while another only patches the symptom. Homeowners in Allentown should weigh scope, not just the number at the bottom of the estimate.

  • A car charger, a new pool pump, or a switch from window units to central air often draws more than an older service was ever built to carry. Before installation, a contractor checks the panel's amperage and how much room is left on it. Many Allentown homes with a service sized decades ago need a panel upgrade first, or the new load risks tripping breakers regularly.

  • Service amperage is the maximum load the panel can safely deliver, and it is usually printed on the main breaker inside the panel door. A Allentown home still running 60 or 100 amp service was sized for a much smaller list of appliances than most households run today. Anything above that opens room for more circuits and modern equipment without overloading the system.

  • Many Allentown homes were built during a wave of construction from the late 1940s through the early 1960s, when 60 amp service and fuse boxes were standard for the appliance load of that time. That wiring was never designed for central air, multiple kitchen appliances, and home electronics running together, so panel capacity is usually the first thing worth checking.

  • A panel upgrade in a Allentown home depends on the new service size, how many circuits need to move over, and whether the existing wiring can be reused or has to be replaced. Older basements sometimes make runs easier to reach, which lowers labor time. Comparing quotes on scope rather than price alone shows which contractor is accounting for the full job.